ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
DESIGN AND
CONSTRUCTION OF 1000VA AUTOMATIC VOLTAGE REGULATION
ABSTRACT
The design and construction of 1000VA
Automatic Voltage Regulator is made to power our Electrical and Electronic
devices, supplying them with the normal output voltage which ranges from 100V-
240v irrespective of the constant voltage and current fluctuation, failure and
instability.
This project helps the society in many ways which include the stepping up and
down of voltage in order to avoid destruction and at is used to vary the amount
of power supply. It is a protection device.
TABLE
OF CONTENTS
CHAPTER
ONE
1.1
Background
of Study
1.2
Statement
of Problem
1.3
Objectives
of
study
1.4
Significance
of Study
1.5
Scope
and Limitation of Study
1.6
Definition
of Term
CHAPTER
TWO
2.1
Literature Review
2.2 The Impact of the
Prepaid Meter on Revenue
2.3 Solutions to
Electricity Problems In Nigeria
References
CHAPTER
THREE
3.0 Concept
3.1 Specification
3.2 Block Diagram
3.3 Circuit Design
CHAPTER FOUR
4.0 The Materials and
the Method of Construction
4.1 The Functions of
the Above Materials
4.2 Testing
Instrument, Equipment and the Techniques
4.3 Testing
Techniques
4.4 Assembly and
Packaging
(Prototype)
CHAPTER FIVE
Bill of Engineering Measurement and
Evaluation
CHAPTER SIX
Summary, Conclusion and Recommendations
CHAPTER ONE
1.0
INTRODUCTION
The design and construction of 1000VA
automatic voltage regulation is made to solve the problems of fluctuation of
current and voltage supplied in the various facilities in our environment. In
rent years, the destruction in our electrical and electronic equipment caused
due to the and unsteady current has lead many home or family homeless and also
an expense.
The introduction of an automatic voltage regulation act as an answer prayer for
the protection of our equipment since it comes into existence. This device is
made to vary the amount of current supplied through the supplier. It also
helps to smoothing the voltage to be used in our electrical and electronic
devices.
The automatic voltage regulator is a protective device that brings out a steady
current which varies between 100V-240V. This device is very good and
active in terms of protecting our devices.
1.1
OBJECTIVE / AIM OF STUDY
The Automatic Voltage Regulator
(1000VA) is made to produce a stable and steady current. The device is
produced or designed to perform the following functions which includes.
This device is used to step up and step down the voltage when the supply is
faulty. It is an appliance that helps to prevent the life span of electronic
any electrical and electric devices that makes the use of it.
It also brings out a filtered current which bring smothering the components
that can make use of it. This system can be called an automatic machine
because it perform the functions of automatic system in which by changing from
one stage to another in order to feet the valuable current and voltage to the
supplied by the components to makes use of it.
The damages received by the society which ignored the use of automatic voltage
regulator is so complicated that it cannot be mentioned in this project. But my
advice to the society is to try as much as possible to make the use of
automatic voltage regulation in their electrical and electronic components
because it is a protective device.
1.3
THE SCOPE OF THE STUDY
The design and construction of IkVA
Automatic Voltage Regulator is the project we are construction. We are
working on this machine because we have some idea on how this machine can be
constructed and also on how it works. We are also doing this because we
want to learn more abut it.
As we have mentioned earlier, this device is a protective device that protects
our electrical and electronic appliances out of current and voltage
fluctuation. This is how it works. When this system is plugged into the
sucket or supply, it will receive a minimum voltage of 100v and filter the
current and voltage thereby brings out suitable voltage output to be used by
the devices in it.
So, we are building or constructing this device to reduce risk and damages the
fluctuation of current / voltage caused by power fluctuations.
1.4
DEFINITION OF IMPORTANT TERMS
Fluctuation: The
change of voltage from normal to low or
High.
Deep:
Process
of voltage and current to extent a long way down from its normal supply.
Unstable:
Not
normal
AFFILIATE LINKS:
Comments
Post a Comment