ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
CONSTRUCTION OF 2,000
LITRES CAPACITY WATER RE-SERVOIR.
ABSTRACT
In the construct of 2,000 litres
capacity water reservoir galvanized steel sheet forms the tank and
an angle iron rod forms the stand. Two full length galvanized sheet were
marked out and cut out to the required sizes. The work stated by cutting
the it gauges galvanized steel sheets of full length into geometrical
dimensions of the cylindrical shape
After cutting, the different of the
sized were assembled and joined together by using 12- guage electrode on
are holding machine. The complete holding of the parts with the
exist piping were ensured.
The top of the tank has a circular
shape opening for the entering of water which is covered with the constructed
over. in order to provide rigid foundation two angled iron was cast and
assembled together which is the constructed support base.
The 2,00 litres capacity water
reservoir is designed for effective storage and transfer of water through
the tap control which allow the easy flow of water through the tank
TABLE OF CONTENTS
Introduction
(Chapter one)
Literature review
(Chapter two)
Construction Method (Chapter
three)
Conclusion and
Recommendation (Chapter four)
References.
CHAPTER ONE
INTRODUCTION
Reservoir are ponds or lakes built for
the storage of water usually by the construction of a dam across river.
The size of reservoir needed is a function the water demands, the natural flows
of the rive impounded and the extent of droughts to be removed
In areas of moderate rainfall storage
may be required during only few days or weeks in a year. In and or semi
and areas, storage capacity may be needed to supplement low stream flow over
period of many months even years. In some instance water can be divided
by gravity flow or by pumping from one river to a reservoir on another
stream. Water supplies can be taken be from the reservoir directly or
water may be released from the reservoir to augment river flows past a water
supply intake downstream.
Water which is an example of a fluid
can occur as underground water and surface water and surface water. And
fluid can be described as any substances which consist of particle that
move freely among themselves and yield to slightest pressure which can be
inform of a or liquid but must not be a solid, rigid o stable substance
the volume of the groundwater greatly exceeds that of all fresh water lakes and
reservoir combined. In region where the land surface is hilly or some
relief, a surface source of water can be developed by damming a river or large
stream or by sculpturing a reservoir out of lowlands that receive regular run
off.
While in surface water, stream supply
most of the water needs of the united status, lakes, ponds, swamps and mashes,
the reservoir represent stored steam flow.
Water or finds are stored for
preservation, transferable and accessible purposes. In areas where water
is usually scarce and not regular, this makes it absolutely necessary that
tanks or storage facilities should be the type that would not change the nature
of the water or fluid.
Generally, the storage of water was
achieved by the indication of constructional materials for storage. The
material could be plastics, metallic, ceramics and others.
AFFILIATE LINKS:
Comments
Post a Comment