ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
CONSTRUCTION OF METAL SHELF
ABSTRACT
In this construction of metal
shelf, mild steel was chosen due to its inherit duties.
The undismountable metal shelf,
which has four compartments and four partition was constructed under the
following processes. This includes drawing and dimensioning of the
proposal metal. Metal shelf, market surveying and procurement of the needed
materials, marketing out and cutting of the materials, welding, smoothing and
filling of the work then finally the painting. The dimensions are height
…… width….. height of one apartment.
Actually, the purpose is to
produce fabricated metal shelf that will be economically cheap and at the same
time, it will meet up to standard in the market.
TABLE OF
CONTENTS
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
2.1
LITERATURE
REVIEW
2.2
TYPES OF
SHELVES
2.3
THE DESIGN OF
SHELVES
CHAPTER THREE
CONSTRUCTIONAL
PROCEDURE
CHAPTER FOUR
4.1
DISCUSSION
4.2
RECOMMENDATION
4.3
CONCLUSION
CHAPTER
ONE
1.1
INTRODUCTION
A metal shelf is an invention with comportment and
partition where books, files and some chemicals are packed in laboratory,
offices, libraries and even homes have shelves. A shelf can be wooden, metal or
glass. They could also be dismountable and undismountable,
The one used in the
libraries and offices for packing books are called book shelf. In
industries, are stored in shelves are referred to as storage facility.
The material selected for the
construction of any shelve strongly depends on the material/properties and
purpose the shelf will serve, generally considering all the materials of
construction, it can be seen that for instance, both point to point comparison
between them will definitely show that in general, metals have a lot of
advantages over non-metals. For example, while many types of metal are suitable
for high temperature operation, non metals such as wood, glass are suitable for
lower and limited range of temperatures metal posses a whittler range of
chemical stability then non- metal.
1.2
OBJECTIVE/SCOPE OF THE PROJECT
The objective of the project is
to construct a metal shelf with the following dimensions.
Height = 6
feet thickness of metal =1.5m (guage) =16
Width = 4
feet metal
type = mild steel
Breath =14 inches
The shelf is of 4 partitions
constructed with metal which is the best material for the construction of
engineering device of this type and in each partition distance the distance
=1.5m which brings it to the total 18inches.
The metal which is used to
contact the book shelf has good qualities of corrosion resistance, mechanical
strength, toughness and it is very hard it is also very much available and has
very good cost effectiveness. Other properties including weld ability and
formability provided the metal at the best option in the selection of material
for the construction of this shelf.
AFFILIATE LINKS:
Comments
Post a Comment