ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
Construction of motorized mixer
ABSTRACT
The fabrication of the pilot
motorized mixer in volved a preliminary computation of the durunsions of the
galvanized steel used, marketing out cutting out to sizes folding, welding,
assembling and painting.
The dimensions of the motorized
mixer are as follows: The vessel is of 300min in diameter and 450mm in height,
the conical edge of the cover is of 300mm in diameter which is formed by are
welding operation.
Th vertical shaft (spindle) is of
450 mm in length and 300mm in diameter the impeller blade is 80mm in diameter
150mm in length which is marketed of the galvanized steel of 2mm thickness.
An electric motor of about 1 hp
is mounted vertically in the mixer barrel. The blades are carried and
positioned at the extreme for the turning operation.
The constructional material used
is locally source and is selected to suit the desired purposes such as
galvanized steel which resists rusting the constructed pilot motorized mixer
was tested and functioned effectively which can be compared with other
important mixer in our market on terms of efficiency and cost and which has
application in processing and applied industries.
TABLE OF
CONTENTS
CHAPTER
ONE
INTRODUCTION
CHAPTER
TWO
LITERATURE REVIEW
CHAPTER
THREE
CONSTRUCTION PATTERN
(PROCEDURE) -
ECONOMIC
ANALYSIS
CHAPTER
FOUR
CONCLUSION AND
RECOMMENDATION
REFERENCE
CHAPTER
ONE
INTRODUCTION
The aim and objective of this
project work is to carry out construction of a pilot motorized mixer for small
scale production that will be suitable for detergent production, paint
production, soap production e.t.c.
Pilot mixer refers to as a mixer
that is small compare to industrial mixer. The mixer installed with an
electric motor can be operated automatically this the name motorized
mixer. The major components of the equipment are the vessel / casting the
shaft, the impeller, baffle and the electric motor resting on it’s plat form.
In Engineering, the design of
pilot motorized mixer machine has to do with consideration of the relative
costs of the selected materials.
The material selected would be of
good output the choice of material or selection of materials has been of high
consideration. Engineering material like metals, non metals, plastics are
used in the design of mixers and has to do with the expectation of the designer
and production crew.
Hence Engineering practice of
fabrication with emphasis on material and cost has been the center focus of
modern technology and the design of the motorized mixer.
For the purposes of this project
construction emphasis on reliability, functionality and efficiency of the mixer
at pilot stage has proved to be very successful which is indicative of it’s
adaptability to industrial application.
AFFILIATE LINKS:
Comments
Post a Comment