ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
CONSTRUCTION
OF A SIX RAISED PANEL DOOR
TABLE
OF CONTENTS
CHAPTER
ONE
1.0
Introduction
1.1
Definition of a panel door
1.2
Classification of a door
1.3
Objectives of the project
1.4
Significance of the project
CHAPTER
TWO
2.0
Timber
2.1
Definition of timber
2.2
Growth of timber
2.3
Types of timber
2.4
Conversion of timber
2.5
Methods of conversion of timber
2.6
Characteristics of a timber
CHAPTER
THREE
3.0
Seasoning of timber
3.1
methods of seasoning
3.2
Importance of timber seasoning
3.3
preservation of timber
3.4
Ways of timber preservation
3.5
Uses of timber
3.6
What is a wood
3.7
Classification of trees
3.8
Characteristic of hard and soft wood
3.9
Types of wood
CHAPTER
FOUR
4.0
Construction of the panel door
4.1
Estimation (materials list) of a panel door
4.2
Hand tools
4.3
Machine used
3.4
Assemble procedure
3.5
Diagram of a panel door
CHAPTER
FIVE
5.0
Joint
5.1
Definition
5.2
Types of joints
5.3
Finishing materials used in a panel door
5.4
Conclusion
5.5
References
CHAPTER
ONE
INTRODUCTION
TO DOOR
A door is a solid barrier that is fixed in an opening in a wall to hinge ,
pivot or slide pen (or close).
The door opening or door way allows access and agrees from building and
between rooms, compartments and corridors. As a component part of a wall
he door and if frame are integral to the overall performance of the wall.
Doors are meant to provide access to the room of a building. They may be
constructed of wood, plywood, glass, metal or a combination of these materials
they are located in such a way that easy movement and privacy of the room is
achieved. For this reason the door are generally placed at the corner of the
room in one line. This provides good ventilation and easy movement of the
users.
1.1
DEFINITION OF A DOOR
A
door can be defined as a hinged, sliding or revolving barrier at the entrance
of a building, room or vehicle or in the framework of a cupboard.
1.2
CLASSIFICATION OF A DOOR
Wood
door may be classified as:
-
Paneled doors
-
Flush doors
PANELED
DOOR
Paneled
doors are frame with stiles and rails around a panel or panel of wood or
ply wood because the door is hinged on the side to open, it tends to sink on
the lock stile.
The stile and rails have to be joined to resist the tendency of the doors to
sink.
FLUSH
DOOR
A variety of flush doors are manufactured with plain flush faces both sides and
fibreboard facing press moulted often with comparatively shallow sinking to
resemble the appearance of a paneled door.
1.3
OBJECTIVES OF THE PROJECT
This project is aimed at using timber towards the construction of the panel
door by the carpenters.
It will try to examine some of the importance of timber to the student while
undertaking the project endeavour in using timber in the construction of a pane
door.
1.4
SIGNIFICANCE OF THE STUDY
The essence of this project is to draw the attention of the students,
carpenters and individuals in constructing a panel door using timbers.
This research draws the attention of the individuals to the need of timber for
construction of a panel door as well as its uses in storing and making a panel
door.
AFFILIATE LINKS:
Comments
Post a Comment