DESIGN AND IMPLEMENTATION OF A COMMAND DRIVEN INTERFACE PROGRAM FOR NUMBER BASE CONVERSION USING VISUAL BASIC
ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
DESIGN AND
IMPLEMENTATION OF A COMMAND DRIVEN INTERFACE PROGRAM FOR NUMBER BASE CONVERSION
USING VISUAL BASIC
ABSTRACT
This project work is
carried out to identify and discuss the need for the use of a command in number
base conversion which is known or called command driven interface program; also
the deals of all models of different type of number base conversion.
The advent of the
computer has extended businesses and organization the capabilities for its
achievement in our today livings. Just as we are about to see in these
book with respect to its effectiveness and accuracy in number base conversion
using a command driven interface.
The manual way of
converting a number from one base to another appears to be so difficult for our
days students especially when dealing with a large number, but these study is
set aside to enhance efficiency and mark the work easier for our student.
THE ORGANISATION OF
WORK
These study is being
organize into six chapters.
Chapter one deals
with the introduction of the proposed study. Under this chapter, problem
of study is introduced, the purpose of the study, aims and objectives also the
scope or delimitation of study, assumptions including the terms of used
definition.
For chapter two, it
reviews the literature reviews related to the research’s area of study.
Chapter three, deals with the description and analysis of existing
system. These chapter starts with the facts finding, method used also the
objective of the existing system. The problems of existing system and justification
for new system.
Chapter four
highlights the designs of the new system. This chapter comprises of
output specification and design, the input specification and design. File
design, the procedure chart, system flow chart and system requirement.
Chapter five is
talking about implementation, the program design, the program flow chart and
pseudo codes. It is also make up of the source program and test
run. Chapter six talked about the documentation, the chapter seven
concludes the study. It contains the recommendations and
conclusions. Thee chapter is broken into the following subheading,
recommendation and conclusion and references.
TABLE OF CONTENTS
TITLE PAGE
ABSTRACT
ORGANIZATION OF WORK
CHAPTER ONE
INTRODUCTION
STATEMENT OF THE PROBLEM
PURPOSE OF THE STUDY
SCOPE OF THE STUDY
LIMITATION
ASSUMPTION
DEFINITION OF TERMS
CHAPTER TWO
DESCRIPTION AND ANALYSIS OF THE
EXISTING SYSTEM
FACT FINDING METHOD USED
AIMS OF THE EXISTING SYSTEM
INPUT, PROCESS, OUT ANALYSIS
PROBLEMS OF THE EXISTING SYSTEM
JUSTIFICATION FOR EXISTING SYSTEM
CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
OUTPUT SPECIFICATION AND DESIGN
INPUT SPECIFICATION AND DESIGN
FILE DESIGN
PROCEDURE CHART
SYSTEM FLOW CHART
SYSTEM REQUIREMENTS
CHAPTER FIVE
IMPLEMENTATION
PROGRAM DESIGN
POGRAM FLOW CHART
PSEUDO CODES
OURCE PROGRAM
TEST RUN
CHAPTER SIX
DOCUMENTATION
CHAPTER SEVEN
RECOMMENDATION AND CONCLUSION
RECOMMENDATION
CONCLUSION
CHAPTER ONE
1.0
INTRODUCTION
Computer And Computer
Programs happened to become more and more of an essential part of our every day
lives. This is because computers are everywhere, whirring and whizzing their
electronic ways into cars, homes, offices, schools and business activities.
When this machine was
first developed, the only people who could operate them were highly trained
engineers and scientist to unscramble the genetic code, but these days almost
everybody operates computers as a part of daily life activities. Of course many
people may not necessary think about the fact that are operating computer as
they make adjustment to their digital watches. This tells us that it is
important to make computer as easy to make use as possible since so many people
now happen to operate this machine that its use seem limitless.
Numbers are usually
assign symbols by which ideas they represent are coded and the numbers of
digits used to code number in any base is equal to the base, but the conversion
of numbers from one base to another appear to be difficult with respect to time
wasted in trying to calculate especially when dealing with large numbers, that
makes its so boring by the time your thinking ability is involved.
The advent and the
introduction of computer machine has brought an aid to help surmount these
problems with the use of a given command.
A computer operator
can not just start operating on a computer without having a little ideas of
what he/she wants to carry out on the computer before a computer should carry
out any structure given, you must apply a command before that task can be
executed on.
It takes just a brief
introduction of a command for a new user to become familiar with these
computer, since it constitutes of a language in which the use user in
communicates with the computer.
The interactions
between the computer and the user is what we called a computer interface the
term computer interface is meant to cover all aspect of these interaction not
just the hardware. The primary purpose of the computer interface is to
enable full communication between the user and the computer system.
1.1
STATEMENT OF THE PROBLEMS
Some given problems we have to know about in the aspect of a command driven
interface are listed below:
1.
Can a given problem be programmed to convert number fro one base to another
with the use of a command driven interface?
2.
can the introduction of the command driver interface in the aspect of number
base conversion eliminate
1.2
THE PURPOSE OF THE STUDY
The study happens to
be very important since its purpose and objectives of carrying research on
these study and analysis are to:
i.
to design and develop a system that will be more effective in carrying out the
operation of base conversion primarily.
ii.
to ascertain whether the existing system is adequate.
iii.
It will also highlight inadequacies, if any and determine ways through which
application packages can minimize or eliminate the established problem.
1.3
SCOPE OF THE STUDY
Since different
conversions exist in curriculum and test this study concentrates on command
driven interface with respect to number base conversion.
The study is
restricted to number base ten, base five, base six, base seven, base eight,
base nine and base sixteen also a reserve conversion back to base ten.
AFFILIATE LINKS:
Comments
Post a Comment