DESIGN AND IMPLEMENTATION OF A COMPUTER BASED QUALITY ASSURANCE MONITORING SYSTEM (A CASE STUDY OF ANAMMCO NIG LTD EMENE ENUGU)
ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
DESIGN AND
IMPLEMENTATION OF A COMPUTER BASED QUALITY ASSURANCE MONITORING SYSTEM
(A CASE STUDY OF
ANAMMCO NIG LTD EMENE ENUGU)
ABSTRACT
This study is based on the
computerization of a quality assurance monitoring system of a manufacturing
industry. It entails sourcing from all parts of the company on how they operate
especially in the quality assurance department.
This project is narrowed to the
expected module. It is not the intention here to treat each module
separately, hence the entire project is menu driven to cover some of the
facilities present.
Finally, at the end of this work, we
would have been able to get a computer-based system that assures quality of a
product(s) of a manufacturing industry.
TABLE OF CONTENTS
Title
page
Abstract
Table of contents
CHAPTER
ONE
1.0
Introduction
1.1
Background information on anammco
1.2
Justification of the project
1.3
Purpose of the study
1.4
Scope of study
1.5
Aims and objectives
CHAPTER
TWO
2.1
Literature review
CHAPTER
THREE
3.1
Description and analysis of the existing system
3.2
Fact finding methods
3.3
Organisation structure
3.4
Objectives of the existing system
3.5
Justification for the new system
CHAPTER
FOUR
4.1
Design of the new system
4.2
Output specification and design
4.3
Input specification and design
4.4
File design
4.5
Procedure chart
4.6
System flowchart
4.7
System requirement
CHAPTER
FIVE
5.1
Implementation
5.2
Program design
5.3
Program flowchart
5.4
Pseudocodes
5.5
Test run
CHAPTER
SIX
6.1
Documentation
CHAPTER
SEVEN
7.1
Recommendation
References
CHAPTER ONE
INTRODUCTION
1.1
BACKGROUND INFORMATION ON ANAMMCO
The Anambra Motor Manufacturing Company
(ANAMMCO) is a joint venture between the federal government of Nigeria and
Daimler Benz AG/ Mercedes Ag of Germany.
Mercedes Benz (MB) Anammco Limited was
incorporated on 17th January 1977, and the new plant was
commissioned on July 8th, 1980 by the First executive president of
Nigeria, Alhaji Sheu Shagari. It started official production in
1981, and has to date made an enviable mark on the nation’s industrial growth,
adding over 20,000 vehicles to the nations transport sector, backed up
effectively with a network of over 36 after-sales service points and spare
parts supply depots.
MB-ANAMMCO manufactures commercial
vehicles and leads in the production of both private and commercial vehicles in
Nigeria. This plant which occupies a sprawling 300,000 square
meters site at Emene, near Enugu is virtually a shining example of a profitable
and viable economic and technological co-operation between the government and
people of Nigeria and Germany.
The multi-million-naira plant was
initially planned to produce trucks for the Nigerian market. But
today, the plant has diversified its production range to include the full range
of commercial and private vehicles for the rapid industrialization of the
country. It not only produces trucks as originally planned but has gone a
step further in fabrication, manufacturing, and production of buses and other
utility vehicles. Part of its product range today include; MB 0131, L 608
D, MB 1520, MB 230, MB 500 SEL, MB 1414, MB 911, MB 809, fire fighting
vehicles, ambulances, mobile clinic collector and other various specialized
types of vehicles. The company has expanded its bus programme to start
producing a new intercity bus (MB 1635). It should also be noted that the
MB-ANAMMCO has achieved over 657 local consent in some of these vehicles,
especially in buses.
As a formidable representative of MB-A
in Nigeria, MB-ANAMMCO brings mecedes-benz technology and know-how to Nigerians
while at the same time create over 800 employment opportunity for
Nigerians. Indeed, the establishment of MB-ANNAMMCO marked the
realization of a great dream of developing the country technologically and
industrially.
MB-ANNAMMCO has actively participated
in the federal government assisted mass transit programme. It has
supplied over 800 units of different bus models to the federal urban mass
transit agency and state and local government mass transit programme.
These buses are still strong and very capable as they are supported by the
unbeatable after sale s services of the company and their renowned distributors
and dealers. Only recently, the company was invited to produce 700
additional mass transit vehicles for the country to oushion the effect of the
increase in the price of petroleum products.
Training facilities/opportunities
centre were commissioned in April 26, 1982, sales, services and spare parts
training for their staff and staff of their distributors, dealers and fliet
owners.
MB-ANNAMMCO continues to live up to its
social responsibilities in all ramifications. It takes care of its 800
employees by offering them medical services, recreational facilities,
etc. In addition, it occasionally donates to charity organisations and
identifies with the government in its socio-cultural endeavours and community
development projects.
1.2
JUSTIFICATION OF THE PROJECT
Computerization or computer-based in
this concept means the introduction of the computer to the different aspects
and levels of the company. Rather than looking forward to handling
information from, messenger – supervisor – maintenance- engineer- manager-
expatiate manager –General manager – Board of Directors, this approach is
necessary because computer is nearest to information systems. Not only
that, it yields better results because a better information system normally
improves organizational result.
So system must change. The
purpose of this new trend is to outline orderly methods of design and effect
the changes which is systematic in changing system. The system of
modifying and reviewing them is called the system development cycle.
1.3
PURPOSE
OF THE STUDY
The project accept different sources of
spare parts, different models of vehicle and keeps track of them in files and
can act any given time when needed by anybody generate the organisations
report.
1.4
SCOPE OF STUDY
The scope of this study is mainly for
the Anambra Motor Manufacturing Company (ANAMMCO) Nig. Ltd, Emene, Enugu state.
1.5
AIMS AND OBJECTIVES
The aims and objectives of this work is
that when the system becomes operational, it will,
1.
Permit on-line-time data storage and information retrieval.
2.
Save the production time per section and as such ensure customer satisfaction.
3.
Increase the operational efficiency and accuracy
AFFILIATE LINKS:
Comments
Post a Comment