ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
DESIGN
AND IMPLEMENTATION OF AN ON-LINE LAN KNOWLEDGE-BASED SYSTEM
ABSTRACT
The project is designed specially for
those hardware engineers/computer scientist who are just commerce their carries
in the field of installation and maintenance of computer network. While
the theories are meant for commercial applicant that are interested in using
the programme technique.
Further more, in this project design,
the principle of different type of network configuration are been
highlighted. And emphasis are made on the installation and maintenance
techniques. Finally, appropriate information are been acquired from human
experts in the field of network.
ORGANISATION OF THE WORK
This study is organized into
chapters. And each chapter handles specific subject area
explicitly. The chapter are further broken down into smaller unit
(subheading) to enable a better understanding of the study. The further
arrangements is shown in the table of content.
TABLE OF CONTENT
TITLE PAGE
ABSTRACT
ORGANISATION OF THE WORK
TABLE OF CONTENT
CHAPTER ONE:
INTRODUCTION
1.1
STATEMENT OF PROBLEM
1.2
PURPOSE OF STUDY
1.3
AIMS AND OBJECTIVES
1.4
SCOPE AND PRELIMITATION
1.5
LIMITATIONS OR CONSTRAINTS
1.6
ASSUMPTIONS
1.7
DEFINITION OF TERMS
CHAPTER TWO
LITERATURE REVIEW
HIERARCHICAL TOPOLOGY
STARTOPOLOGY
BUSTOPOLPGY
RING NETWORK
BNC CONNECTOR
CHAPTER THREE
3.0
DESCRIPTION AND ANALYSIS OF EXISTING SYSTEM
3.1
FACT FINDINGS METHOD USED
3.2
OBJECTIVES OF THE EXISTING SYSTEM
3.3
INOUT ANALYSIS
3.4
PROCESS ANALYSIS
3.5
OUTPUT ANALYSIS
3.6
PROBLEMS OF THE EXISTING SYSTEM
3.7
JUSTIFICATION OF THE NEW SYSTEM
CHAPTER FOUR
4.1
DESIGN OF THE NEW SYSTEM OUTPUT SPECIFICATION AND DESIGN
4.2
FILE DESIGN
4.3
PROCEDURE CHART
4.4
SYSTEM FLOW CHAR
4.5
SYSTEM REQUIREMENT
CHAPTER FIVE
5.1
IMPLEMENTATION
5.2
PROGRAM DESIGN
5.3
PROGRAM FLOW CHART
5.4
PSEUDOCODES
5.5
SOURCE PROGRAM
5.6
TEST RUN
CHAPTER SIX
DOCUMENTATION
CHAPTER SEVEN
7.1
RECOMMENDATION
7.2
CONCLUSION
APPENDICES/REFERENCE
CHAPTER ONE
INTRODUCTION
How is computer and other related
devices actually able to send information across data communication
lines. The answer to this is the installation and maintenance of computer
network. Furthermore, installation and maintenance of computer network is
the glue that holds all data in the exact form, the data is to be transfer from
one place to another. While the procedures for installation of computer
methods are embodies in this project.
STATEMENT OF THE PROBLE
Computer hardware may fail, telephone
line may fail and more likely, the computer software may have bugs that make
the network stop working. How does the airlines clerk sell tickets when
the computer is down? How can the pilot send a message across if the
network fails? How do you get your electronic mail, pay bills, get news,
if you become dependent on computer networks that sometimes fails. If you
put a shaved database, you want to be sure that it will not disappear or be
tampered with. It you can use home computer raid your account and toil
will your money?
A company that puts all its important
data in line runs the risk to go out of business if that information is boss or
incorrect.
Furthermore, support the owners of a
saved data based want only certain people to use it one way to limit use, is to
give a password to those people alone, that will have access to it and before
opening the data base, the computer will ask the user to enter a password.
Password protection is not parted,
though if someone finds out your password and use it, the computer will not
know that such password is been used illegally by such person.
Finally, inability of the computer
scientist to observe appropriate procedure in connection during installation
poses treat to them, which however may lead to damage of the computer and
cards.
PURPOSE OF THE STUDY
The purpose of the study is to design a
system which shall render an assistance to the computer scientist during the
installation and maintenance of a compute network. Moreover, proper
installation of various components of the networks are achieved and the
prevention and corrective maintenance are properly added.
AIM AND OBJECTIVES
The aim and objectives of the study are
as follows:
1.
To minimize cost: With maintenance,
there is reduction in cost, i.e. instead of spending more money in the
purchasing of new equipment, the money can be used in the maintenance of the
faulty equipment.
2.
To reduce the staff:
With the introduction of the computer network (computerized) there is
possibility that the number of staff will reduce.
3.
To share file and resources at a given time:-
With the computer network or files and other peripherals can be shared at any
given time as printer, scanner and files.
4.
To increases
output:- With
the computer network; jobs that are scheduled for 10 day can be done in 3 days
and this will increase output.
5.
The overall objectives of the local area network:- Is
to connect the computer system and devices in the same geographical area.
SCOPE OF THE STUDY
There are different kinds of computer
network system, such as Local Area Network (LAN) and Wide Area Network (WAN)
etc. But this project is limited to only Local Area Network (LAN) and
using about 100 workstation
ASSUMPTION
In the design of this project, it was
assured that the computer scientist should have been conversant with the use of
computer hardware system computer network system and the computer software
system.
AFFILIATE LINKS:
Comments
Post a Comment