ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
FORMULATION AND COMPARISON OF INDUSTRIAL BAR SOAP AND DETERGENT
ABSTRACT
The sole aim of this research work is comparison
and formulation of industrial Bar Soap and detergent. The major expert of this
project deals with quality control processes in the production of a high
quality bar soap and detergent.
In synthetic detergent which was developed to
explain the soapy detergent has a better quality it was prepared by a
sulphontor reaction when this is carried at a detergent paste is formed which
when builders and other additives were edded become a detergent and when it was
died the detergent powder come out from the project it was notice that (STPP)
helps the detergent to reduced water hardness by segnestering calcium in and
heavy metal in water, could insure the cleaning action of detergent.
Also the hydrogen oxide acts as stain
remover due to its bleaching action, the cme act as anti- redemption
agent.
In soap production cold process was used and this was found out to be the most
effective means of production considering several factors. In the production of
bar soap, palm kennel oil was used instead of follow or gaseous gives a high
total value which produces soap which is slow to dissolve at low temperature.
Different formulation was made and it was found out that the best ratio for a
high quality soap to 2:1 of palm kernel oil to caustic soap respectively.
Carrying out test on soap on soap production gave
soponification of P.K.O. to be 248.24, respective index 1.45, free aid
value of 1.56, aid value of 3,5, moisture content of soap 30.29 percentage free
alkali 0.4%, alcohol insoluble mater of 1.43% and put value of 8.80 at a
temperature reading of 30.00c.
CHAPTER ONE
INTRODUCTION
Soap can
be defined as the sodium or potassium salts of fatly acids containing 12 to 18
carbon atoms which are either soluble or insoluble.
They are also salts of acids. There are two classes of soaps namely had and
soft soap. The nature depends on the metallic radical in the alkali used in the
production.
They are characterized by the well known soap like properties of lowering the
surface tension of water, foaming assisting wetting and emulsification and
promoting list removed or detergency.
By virtue of their dirt removing pro properties such soaps may correctly be
deseribed as detergents.
An advantage which the detergent posses in common over soap in that they are
not precipitated by the calcium and magnesium salts present in herd water.
Soaps and detergents belong to the general class
of substances known as surface-active agents or surfactants. They are
substances which when dissolved in a solvent even at very low concentration
have the prosperity of lowering the surface energy and hence altering the
surface behaviors of the solvent to an extreme degree. this phenomenon of
surface- activity may be exhibited in aqueous system.
May types of oil and fat can be used too the production of soap but the project
is limited to the use of palm kernel oil. Different concentrations of sodium
hydroxide concentration to get the best blend of soap.
The characteristics of the soap produced such as
texture, odour, later and other properties would be obtained as it will save as
a quality control means and it will instill some confidence to the consumers.
In this work, high quality industry soap can be produced using palm kernel oil.
It therefore entails working out the soap the soap thermals and using the
formulations to produce soap which is to be compared with the detergent.
The soap so produced will be tested to determine
their various physical and chemical qualities. In the other way, high quality
detergent can be produced using sulphonated linear alkyl benzene.
Generally, we are going to formulation and compare
the industrial bar soap and detergent.
AFFILIATE LINKS:
Comments
Post a Comment