ATTENTION:
BEFORE YOU READ THE
PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!
TO GET THE FULL
PROJECT FOR THE TOPIC BELOW PLEASE CALL:
08068231953,
08168759420
TO GET MORE PROJECT
TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:
STRUCTURAL DETAILING OF TWO STOREY
BUILDING
PREFACE
The whole information conveyed in this book has been planned and written for
proper understanding of structural detailing of a building.
The approach in this book is to provide the readers sound and basic knowledge
in structural detailing in a building. Consequently, I have given more details
than is normally given in a book concerning detailing of structural members,
which include slabs, beam, stairway and column.
This book will also provide some bases as a prerequisite in detailing worth of
a small residential building.
All the works t o be carried out, as regard to this field are mostly, the work
of a structural engineer throughout the end of the project.
STRUCTURAL
SYMBOLS AND NOTATION
The abbreviation recommended for structural detailing works are as follow:
a.
R.C.
= Reinforced concerts
Drg
= Drawing
Hor
= Horizontal
Vert
= Vertical
Pia
= Diameter
Fdn
= Foundation
Conc
= Concrete
C.B
= Column Base
b.
TYPES OF
REINFORCEMENT
R
= Mild steel
T
or Y = High yield
steel
b.
COMMENTS RELATING TO
REINFORCEMENT
C
= Centre line
B
= Bottom
T
= Top
C/c
= Centre to centre
TABLE OF
CONTENTS
CHAPTERS
CHAPTER ONE: Introduction
CHAPTER TWO: Detailing Process
CHAPTER THREE: Design Condition and Summary
CHAPTER FOUR: Reinforced Concrete
CHAPTER FIVE: Engineering Design Specifications
CHAPTER SIX: Detailing of the Elements
Foundation
Column
Beam
Staircase
CHAPTER SEVEN: Bibliography
CHAPTER ONE
INTRODUCTION
In other to provide
information to contractors in a construction industry for works to be carried
out on sites, drawings are produce, which serves as means of communication are
used by designers in every engineering specters.
For those reason, the
works are mostly work of a structural engineer to design a construction of
structure for sheltering to be completed, such as road, bridges, railways,
dams, buildings and other relevant construction work. Sketches of these works
are prepared by free hand, then these sketches are put together into a
clear and well presented working drawing used by the builders and contractors
for implementation after taken of the particular drawing to the specified
authorities for approval.
All detailing works
developed by the structural engineer (the detailer) serves as a good
prerequisite of standing the risk of sudden collapse of building or structural
failure of a building members. It also helps to avoid unnecessary delay of
works which may come up doubt, and frequent clarification.
The methods ad
techniques involved for detailing reinforced concrete structures are shown in
this project.
AFFILIATE LINKS:
Comments
Post a Comment